Due to the Various sizes of the Frostbyte cooling (120, 240, 360) that are available in our systems, this is a generic step by step for removing the main pump/cpu cooler component from the motherboard.


Frostbyte Hose Orientation for Chronos SFF


Instructions for other systems:


Step 1: Remove 4 surrounding screws from the frostbyte bracket.

 

 

Setp 2: Make sure all 4 screws are removed and that the frostbyte power connection is unplugged from the backside of the case.

 



 

Step 3: Remove frostbyte from the CPU and remove the fan screws from the radiator. Amount of screws for each frostbyte vary depending on size. 

 

 


(This example is for a Frostbyte 120)



Generic Manual for installation. 


Note: Installation method may vary, components may vary depending on the system type.


-VERSION 1-



FOR THIS LAST STEP, PLEASE USE THE ORIGINAL POWER SOURCE THAT THE PREVIOUS COOLING SYSTEM WAS USING.




-VERSION 2-