There are two styles of Hot Swap bays available for our Millennium and Genesis systems.

The standard hot swap bay has 5 trays that are used for hard drive installation. A small bag with screws is sent with every system in order to be able to install the hot swap drives. Make sure the power switch is enable for the bay that will have the drive. Detailed description of the device is below.


______________________________________((pictures below this line))___________________________________________

__________________________________(If the pictures do not load please refresh)_____________________________________________________



The lockable hot swap bay cages will only accept 3.5" Hard drives. 

SSD hard drives cannot be installed into this style of hot swap cage.